Don’t Make These 5 Problems While Buying Protective Films In Atlanta

The name protective film kind of says a lot – it is designed to protect and secure critical surfaces of objects from scratching, abrasions, marring, dirt, UV exposure, and even contamination. Protective Films in Atlanta are considered surface protection or anti-mutilation solutions for product packaging, shipping, assembling, and storage.
We must admit that protective films play a crucial role in the packaging, shipping, and automotive industries due to their strength and durability. By choosing the right Protective Films Roswell or any other location, you can save a lot of money by reducing the costs arising from product rejections and re-works.
But, protective films are effective only when you invest in the right quality product. Otherwise, you would end up using poor-quality films that are unable to safeguard your products from mutilation or scratch.
5 Problems Of Surface Protective Films You Should Avoid
Here are the most common issues with surface protective films you should be aware of –
1. Poor Surface Adhesion
If the protective films cannot stick longer or peel off too easily, there can be multiple reasons, such as –
• Insufficient amount of adhesive
• Unclean surface or contaminated by moisture or dust
• The film is not uniformly stretched
Once you see any of these issues with the protective film, it would lead to distortion and insufficient seal during installation.
2. Debonding
If the film leaves a residue on the product surface at the time of removal, it is better to avoid the inferior quality. Sometimes, even good quality Protective Films Marietta may leave a minimum amount of adhesive which can be easily removed with a clean cloth dipped in organic solvent. Try to avoid those protective films that can create additional cosmetic problems on your product surface.
3. Stubborn Films Cannot Be Removed
When manufacturers are unable to excel in the production of quality pressure-sensitive adhesives, the films cannot be easily peeled off. Using ordinary adhesives by manufacturers is another probable reason for this disastrous consequence.
4. Edge Lifting
While buying protective films, make sure to ask your vendor if the protective films don’t have any issues with edge lifting. This occurs when the film’s edge starts to lift off the surface. However, investing in right Protective Films Alpharetta for your product does make the difference.
5. Ghosting
The primary objective of using protective films is to secure the surface without leaving behind any evidence. However, the existence of visual blemishes or what we may call ‘ghosting’ may occur due to residue left behind from solvents, markers, or cleaners used for surface cleaning.
How to Avoid These Problems of Protective Films
Once you find the right vendor for adhesive tapes or Protective Films in Atlanta to safeguard your product surface, you don’t need to face any of these problems. Custom Packaging Solutions offers a full range of films meant to protect all kinds of surfaces. They also provide customized solutions to fit your business needs.
FAQs:
Which type of film is ideal for a quality protective film?
Low-density polyethylene (LDPE) is considered the most common type of surface protective film.
How long will a protective film last on a product surface?
The common paint protective film can ideally last for around 5 to 7 years, depending on the weather condition, exposure, and the method of care.
Can protective films be removed?
When required, Protective Films in Roswell or any other locations can be smoothly removed with the help of mild heat produced by a hairdryer or steamer.

read more..